reduction cell
英 [rɪˈdʌkʃn sel]
美 [rɪˈdʌkʃn sel]
网络 电解槽
双语例句
- With the development of large-scale aluminum reduction cell, higher quality and better property of cathode ramming paste are required.
随着大型铝电解槽的发展，对阴极捣固糊性能、品质提出了更高的要求。 - Mathematical Model and Error Analysis for the Calculation of Magnetic Field in a Reduction Cell
铝电解槽磁场计算的数学模型及其误差分析 - In order to solve the local damages of the reduction cell, the article introduces the process and experience of the cell shutting, planing, repairing, roasting and startup in detail.
针对电解槽局部破损问题，详细介绍停槽、刨炉、补槽、焙烧及启动等过程及经验。 - The text analyzes the damage types of aluminum reduction cell, and proposes the methods to check out and repair the aluminum electrolytic plots.
本文分析了铝电解槽的破损形式，提出了铝电解槽破损的检查与修补方法。 - The article describes two different structure of the anode lifting mechanism in prebaked anode aluminum reduction cell, one is spiral lifting type;
介绍预焙阳极铝电解槽阳极提升机构两种不同的设计结构&螺旋起重式和三角板滑道式； - A method on improving cathode lining period of aluminium reduction cell
一种有助于提高铝电解槽阴极内衬寿命的方法 - The development of aluminum industry is restricted by the technical matters of aluminum reduction cell life and cur-rent efficiency in china.
最近几年，我国铝电解得到飞速的发展，但仍存在槽寿命短电流效率低等问题。 - This paper introduced the hardware and software of the wireless-monitoring system of multi-parameters for aluminum reduction cell.
本文介绍铝电解槽多参数无线监测系统的硬件结构和软件设计。 - The Software Development of Analysis and Decision-making of AE Effect in Aluminum Reduction Cell
铝电解槽AE效应的分析与决策软件开发 - The3D finite element model of a single aluminum reduction cell for calculating the magnetic field is given.
据此建立了计算槽内熔体电流产生的三维磁场的有限元模型，得到了槽内的磁场分布图。 - Thus the anode quality is one of the key factors influencing the proper operation of the reduction cell.
因此说，阳极质量是大型预焙槽的正常运行的关键因素之一。 - Research on Fault Diagnosis System for the Operating Mode of the Anode of the Aluminum Reduction Cell
铝电解槽阳极工作状态故障诊断系统研究 - The general damaged forms and causes of cathode in aluminum reduction cell are analyzed, the checking and keeping measures for cathode damaged cell are introduced, and the suggestions about cathode prevention and improvement are proposed.
分析铝电解生产中阴极的常见破损形式和成因，介绍阴极破损的检查判断和维护管理方法，提出预防和改进措施。 - Heat balance control of aluminum reduction cell based on BP nerve networks
基于BP神经网络的铝电解槽热平衡控制系统 - From three aspects of research such as physical model, mathematical model and industry measurement, this paper introduces the research development of electrolyte flow in aluminum reduction cell and gives the compositive estimation.
从物理模型、数学模型和工业测试三个方面，对铝电解槽中电解质运动的研究的进展及结果进行了综合评述。 - A comparison of measured and calculated results in a 200 kA aluminum reduction cell shows good agreement.
对200kA侧部四点进电的铝电解槽进行计算与测试，其结果吻合良好； - An intelligent fuzzy control system for the prebaked anode aluminum reduction cells was developed by comprehensively using intelligent control techniques including fuzzy control, neural networks and expert system, and the techniques of on line simulation of "three fields" of aluminum reduction cell.
综合运用模糊控制、神经网络和专家系统等智能控制技术，以及铝电解槽三场在线仿真技术，开发出了预焙铝电解槽智能模糊控制系统。 - The operating performance of TiB_2/ C composite cathodes was evaluated in a laboratory aluminium reduction cell.
在实验室铝电解槽中，对TiB2/C复合阴极材料的工艺持性进行了实验。 - The general anthracite carbon cathode used in alumina reduction cell after about 4 months can become graphitization.
普通无烟煤基阴极炭块在铝电解槽中使用4个月左右就石墨化。 - The material balance of magnesium reduction cell was calculated by means of derived simultaneous equation and calculating formula.
根据给出的联立方程和计算公式，计算了现行生产的镁电解槽的物料平衡。 - Adaptive control is the key of alumina concentration control in aluminum reduction cell.
自适应控制是电解槽氧化铝浓度控制的核心，但生产条件的多样性使得浓度控制过程融入多种控制策略成为必要。 - A simple mechanical model for the cradle used in a large-size aluminum reduction cell is described.
本文建立了大型铝电解槽摇篮架的力学模型。 - The status of primary aluminum industry in China is introduced, points out the cause of short service life of pre-baked anode reduction cell and the mechanism of TiB_2 cathode painting technology to improve the service life of cell.
简要介绍了我国铝电解工业的发展现状，指出了我国预焙铝电解槽寿命短的弊端；并分析了电解槽早期破损的原因和采用TiB2阴极涂层技术提高电解槽寿命的机理； - The paper put forward the modified plan for the fluorides feeding system of reduction cell based on the analysis of hyper dense phase conveying which has the disadvantage of proportioning fluorides and describes the engineering of fluorides conveying.
通过分析现有超浓相输送系统对电解槽氟化盐配料存在的不足，提出了对电解槽氟化盐供料系统的改进方案，阐述了对氟化盐输送系统的设计分析和探讨。 - The reduction cell is the important device produced aluminum by electrolytic method.
电解法生产铝的重要设备是电解槽。 - Aluminum reduction cell is the core equipment for extracting aluminum, and its development and progress represent the renovation of aluminum electrolysis.
铝电解槽是炼铝的核心设备，其发展与进步代表了电解铝工艺的革新。 - At present, large-scale pre-baked aluminum reduction cell is the major equipment in the process of electrolytic production in domestic and foreign. To stop and opened it through the implementation of artificial means.
大型预焙铝电解槽是目前国内外铝电解生产过程中的主要设备，其停槽和开槽的过程都是通过人工方法实现的。 - Developed by "aluminum reduction cell based on embedded data entry and analysis system" hardware and software system has been continuously improved, the current has been successfully used in the electrolysis Qingtongxia Aluminum Group Management.
所开发的基于嵌入式铝电解槽数据录入与分析系统软、硬件系统经过不断完善，目前已成功应用在青铜峡铝业集团各电解车间的生产管理中，受到了用户的好评。 - Aluminum reduction cell is a nonlinear, multi-coupled, time varying delay system of industrial process.
铝电解槽是一个非线性，多耦合，时变和大时滞的工业过程体系。